Français dropdown-ico

Manuel d’utilisation Epson ELPLL02

31 pages 0.74 mb
Télécharger

Aller à la page of 31

Summary
  • Epson ELPLL02 - page 1

    9 User ’ s Man ual f or ELPLL02 Long-Focal Length Zoom Lens • This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illust ...

  • Epson ELPLL02 - page 2

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 3

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 4

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 5

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 13 Adob ...

  • Epson ELPLL02 - page 6

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 68.3 to 1 16.2 mm 2. Zoom ratio 1.7 x 3. f number 2.14 to 2.98 4. Projection size 60 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 7

    9 User ’ s Manual f or Long Thr ow Zoom Lens ELPLL03 • This long throw zoom lens is designed for use only with EPSON multi- media projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may ...

  • Epson ELPLL02 - page 8

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to screw the Long thro w zoom lens and adapter ring down completely . Unless the y are securely scre wed on, they could f all off and cause damage or injur y (es- pecially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 9

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 10

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 11

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 13 Adob ...

  • Epson ELPLL02 - page 12

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 144.1 to 194.5mm 2. Zoom ratio 1.35 x 3. f number 2.60 to 3.27 4. Projection size 80 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 13

    11 User ’ s Manual f or ELPLR01 Rear Projector wide Lens • This wide-angle lens is designed for use only on EPSON multimedia projectors. • This lens is designed for use only on rear projection and rear projection box systems. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may di ...

  • Epson ELPLL02 - page 14

    12 1. Bef ore mounting the wide-angle lens 1-1 Safety precautions W arning Be sure to scre w the Rear Projector wide lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you hav ...

  • Epson ELPLL02 - page 15

    13 2. Mounting the rear -pr ojection wide-angle lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations below ...

  • Epson ELPLL02 - page 16

    14 Rear lens cap (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear -pr ojection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the rear projector wide lens with ...

  • Epson ELPLL02 - page 17

    15 (2) Adjusting the wide lens f or a rear projector • This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. T urn the lens shift button to move the lens all the way down. 2. Loosen the 2 focus ring mounting screws by using the hex wrench that came in the same package. 3. Loosen the ...

  • Epson ELPLL02 - page 18

    16 (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 16 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 19

    18 4. Rear -pr ojection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 27mm 2. f number 2.3 3. Projection size 60 to 100 inches 4. Mass 1600 g 4-2 Appearance with rear pr ojector wide lens mounted About 455mm 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 18 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 20

    9 User ’ s Man ual f or ELPLS01 Standar d Lens • This standard lens is designed for use only with EPSON multimedia pro- jectors. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer slightly from your actual product. • Specifications are subject to change without notice. S ...

  • Epson ELPLL02 - page 21

    10 1. Bef ore mounting the standard lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have a ...

  • Epson ELPLL02 - page 22

    11 2. Mounting the standar d lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match yo ...

  • Epson ELPLL02 - page 23

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standar d lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws. Be sure that the seal reading “UP- ...

  • Epson ELPLL02 - page 24

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 13 Adobe ...

  • Epson ELPLL02 - page 25

    15 4. Standar d lens specifications 4-1 Lens specifications 1. Focal length 49.2 to 68.9 mm 2. Zoom ratio 1.4 x 3. f number 1.84 to 2.36 4. Projection size 30 to 300 inches 5. Mass 1300 g 4-2 Appearance with standar d lens mounted About 475mm 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 26

    9 User's Manual f or the ELPL W01 Wide Zoom Lens • This wide zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to decrease the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer s ...

  • Epson ELPLL02 - page 27

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 28

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 29

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading "UPPER" i ...

  • Epson ELPLL02 - page 30

    13 (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo • Be sure to remov e the front lens cap be- f ore tur ning on the po wer , or it ma y melt from the heat. • When handling the zoom lens , ta ...

  • Epson ELPLL02 - page 31

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 37.9 to 45.5 mm 2. Zoom ratio 1.2 x 3. f number 2.34 to 2.65 4. Projection size 60 to 200 inches 5. Mass 2600 g 4-2 Appearance with zoom lens mounted About 480mm 02_STZL_DTP_E.pm6 01.2.15, 4:22 PM Page 15 Adobe PageMaker 6.0J/PPC ...

Fabricant Epson Catégorie Camera Lens

Les documents que nous recevons du fabricant de l'appareilEpson ELPLL02 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Epson
- manuels d’utilisations ELPLL02
- fiches produit Epson
- dépliants
- ou étiquettes-énergie Epson ELPLL02
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Epson ELPLL02.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Epson ELPLL02, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Epson ELPLL02. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Epson ELPLL02.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Epson ELPLL02, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Epson ELPLL02 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Epson ELPLL02.

Le manuel d’utilisation complet Epson, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Epson ELPLL02 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Epson ELPLL02, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEpson ELPLL02 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Epson ELPLL02 - qui devraient nous aider dans les premières étapes lors de l'utilisation Epson ELPLL02
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Epson ELPLL02
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Epson ELPLL02 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Epson ELPLL02?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Epson ELPLL02, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Epson ELPLL02 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)