Epson ELPLL02の取扱説明書

31ページ 0.74 mb
ダウンロード

ページに移動 of 31

Summary
  • Epson ELPLL02 - page 1

    9 User ’ s Man ual f or ELPLL02 Long-Focal Length Zoom Lens • This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illust ...

  • Epson ELPLL02 - page 2

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 3

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 4

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 5

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 13 Adob ...

  • Epson ELPLL02 - page 6

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 68.3 to 1 16.2 mm 2. Zoom ratio 1.7 x 3. f number 2.14 to 2.98 4. Projection size 60 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 7

    9 User ’ s Manual f or Long Thr ow Zoom Lens ELPLL03 • This long throw zoom lens is designed for use only with EPSON multi- media projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may ...

  • Epson ELPLL02 - page 8

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to screw the Long thro w zoom lens and adapter ring down completely . Unless the y are securely scre wed on, they could f all off and cause damage or injur y (es- pecially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 9

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 10

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 11

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 13 Adob ...

  • Epson ELPLL02 - page 12

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 144.1 to 194.5mm 2. Zoom ratio 1.35 x 3. f number 2.60 to 3.27 4. Projection size 80 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 13

    11 User ’ s Manual f or ELPLR01 Rear Projector wide Lens • This wide-angle lens is designed for use only on EPSON multimedia projectors. • This lens is designed for use only on rear projection and rear projection box systems. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may di ...

  • Epson ELPLL02 - page 14

    12 1. Bef ore mounting the wide-angle lens 1-1 Safety precautions W arning Be sure to scre w the Rear Projector wide lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you hav ...

  • Epson ELPLL02 - page 15

    13 2. Mounting the rear -pr ojection wide-angle lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations below ...

  • Epson ELPLL02 - page 16

    14 Rear lens cap (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear -pr ojection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the rear projector wide lens with ...

  • Epson ELPLL02 - page 17

    15 (2) Adjusting the wide lens f or a rear projector • This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. T urn the lens shift button to move the lens all the way down. 2. Loosen the 2 focus ring mounting screws by using the hex wrench that came in the same package. 3. Loosen the ...

  • Epson ELPLL02 - page 18

    16 (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 16 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 19

    18 4. Rear -pr ojection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 27mm 2. f number 2.3 3. Projection size 60 to 100 inches 4. Mass 1600 g 4-2 Appearance with rear pr ojector wide lens mounted About 455mm 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 18 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 20

    9 User ’ s Man ual f or ELPLS01 Standar d Lens • This standard lens is designed for use only with EPSON multimedia pro- jectors. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer slightly from your actual product. • Specifications are subject to change without notice. S ...

  • Epson ELPLL02 - page 21

    10 1. Bef ore mounting the standard lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have a ...

  • Epson ELPLL02 - page 22

    11 2. Mounting the standar d lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match yo ...

  • Epson ELPLL02 - page 23

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standar d lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws. Be sure that the seal reading “UP- ...

  • Epson ELPLL02 - page 24

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 13 Adobe ...

  • Epson ELPLL02 - page 25

    15 4. Standar d lens specifications 4-1 Lens specifications 1. Focal length 49.2 to 68.9 mm 2. Zoom ratio 1.4 x 3. f number 1.84 to 2.36 4. Projection size 30 to 300 inches 5. Mass 1300 g 4-2 Appearance with standar d lens mounted About 475mm 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 26

    9 User's Manual f or the ELPL W01 Wide Zoom Lens • This wide zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to decrease the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer s ...

  • Epson ELPLL02 - page 27

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 28

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 29

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading "UPPER" i ...

  • Epson ELPLL02 - page 30

    13 (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo • Be sure to remov e the front lens cap be- f ore tur ning on the po wer , or it ma y melt from the heat. • When handling the zoom lens , ta ...

  • Epson ELPLL02 - page 31

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 37.9 to 45.5 mm 2. Zoom ratio 1.2 x 3. f number 2.34 to 2.65 4. Projection size 60 to 200 inches 5. Mass 2600 g 4-2 Appearance with zoom lens mounted About 480mm 02_STZL_DTP_E.pm6 01.2.15, 4:22 PM Page 15 Adobe PageMaker 6.0J/PPC ...

メーカー Epson カテゴリー Camera Lens

Epson ELPLL02のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ELPLL02の取扱説明書
- Epsonの製品カード
- パンフレット
- またはEpson ELPLL02の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Epson ELPLL02の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Epson ELPLL02の取り付け説明書、サービスマニュアル、簡易説明書、またはEpson ELPLL02のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Epson ELPLL02の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Epson ELPLL02デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがEpson ELPLL02を使用するのを助ける技術的文書のことです。説明書は通常、全てのEpson ELPLL02ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Epsonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Epson ELPLL02の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははEpson ELPLL02の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Epson ELPLL02に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Epson ELPLL02デバイスの基本機能を使うにあたってのヒント。 Epson ELPLL02のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Epson ELPLL02に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるEpson ELPLL02のメーカー/サービスへの連絡先に関する情報。

Epson ELPLL02についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもEpson ELPLL02の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEpson ELPLL02で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)