Manuale per l’uso HSM HSM FA 500.2

20 pagine 1.22 mb
Scarica

Vai alla pagina of 20

Summary
  • HSM HSM FA 500.2 - page 1

    HSM F A 500.2 OPERA TING INSTRUCTIONS P APER SHREDDER Combination with HSM KP 80 Keep this instruction for future use! 1.655.999.1 12 – 0702 english ...

  • HSM HSM FA 500.2 - page 2

    2 0702 F A 500.2 HSM GmbH + Co. KG Bahnhofstrasse 1 15 D-88682 Salem / Germany T el.: +49 (0) 75 53 / 822-0 Fax.: +49 (0) 75 53 / 822-160 E-Mail: info@hsm-online.de www .hsm-online.de Contents 1. Proper use, warranty ................................................................................................................. 3 2. Safety instruc ...

  • HSM HSM FA 500.2 - page 3

    0702 3 F A 500.2 Danger of injury Do not reach into the paper feed opening. Splinters can cause injury Wear protective goggles when de- stroying diskettes, CDs and hard credit cards. Danger of injury during intake Do not go near the paper feed open- ing with long hair , loose clothing, ties, scarves, necklaces, bracelets etc. Do not destroy any mat ...

  • HSM HSM FA 500.2 - page 4

    4 0702 F A 500.2 Combination with HSM KP 80 3. Overview 1 7 4 3 2 5 1 Main switch (only solo-version) 2 Keypad 3 Emergency stop button 4 Loading tray 5 Intake conveyor , paper feed opening 6 Braking swivel castors 7 Nameplate 8 Oiler 8 6 ...

  • HSM HSM FA 500.2 - page 5

    0702 5 F A 500.2 4. Dimensions Space requirements for operation and maintenance Load on rollers HSM F A 500.2 Combination-version HSM F A 500.2 Stand alone-version Combination-version Stand alone-version 2 x 180 kg 2 x 180 kg 1590 1925 max. 1410 1185 960 630 500 1155 880 500 880 1155 560 910 960 630 1000 500 1255 3500 1000 500 1255 2590 1410 1185 8 ...

  • HSM HSM FA 500.2 - page 6

    6 0702 F A 500.2 5. T ransportation, installation • During transport, observe the high centre of gravity of the paper shredder! • Place the pallet with the shredder in its packaging on a smooth, level surface. • Observe the instructions for unpacking. • If you need to move the shredder through narrow doors, you can wait until it is at its ? ...

  • HSM HSM FA 500.2 - page 7

    0702 7 F A 500.2 • Insert the connecting screw (5) and the clamp (6) on the end of the hose and secure the unit on the oiler . • Pour the oil into the oiler container from the two bot- tles supplied. Ready for operation Green LED Light has no function. Start button The shredder switches on. The feed belt moves in the intake direction. Stop butt ...

  • HSM HSM FA 500.2 - page 8

    8 0702 F A 500.2 7. Start-up and inspecting the safety devices Check that the safety devices are working properly: • At the start of each shift • After any maintenance or repair work Do not start the machine until you have checked the safety devices and found them to be in perfect working order . If any defect arises during operation stop the m ...

  • HSM HSM FA 500.2 - page 9

    0702 9 F A 500.2 Safety switch on the inspection door (only stand alone-version) Open the inspection door . The shredder must switch off immediately and the ” Safety circuit interrupted ” LED must light up. The machine will only start again once you have closed the inspection door . Safety switch on the protective fl ap (only stand alone-versi ...

  • HSM HSM FA 500.2 - page 10

    10 0702 F A 500.2 8. Malfunctions Check the following before calling customer service: • Is the power plug connected? • Is the shredder switched on? • Is there a paper jam in the shredder? • Has the motor been overloaded? Paper jam Y ou have fed in too much paper . ` The red LED on the keypad blinks. ` The cutting block automatically runs i ...

  • HSM HSM FA 500.2 - page 11

    0702 11 F A 500.2 Checking the chain tension (twice yearly) • Switch off the shredder . • Pull out the power plug. • Remove the left side cover . The sagging of the chain should be 9 to 14 mm. If you need to tighten the chain: • Loosen the clamping nuts (1). • Lower the motor until the sagging is 9 to 14 mm. • T ighten the clamping nuts ...

  • HSM HSM FA 500.2 - page 12

    12 0702 F A 500.2 Tightening the feed belt The feed belt should not slip when loaded with material. • Switch off the shredder . • Remove the feeding table and the left and right side covers. • Loosen the hexagon nuts (1) of the tension roll on the left and right side. • Loosen the lock nuts (2) of the tensioning bolts (3). • T ighten the ...

  • HSM HSM FA 500.2 - page 13

    0702 13 F A 500.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 1 15, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM F A 500.2 corresponds with the above mentioned EC Machine Directive includi ...

  • HSM HSM FA 500.2 - page 14

    14 0702 F A 500.2 Solo 400 V 12. Electric wiring diagrams Solo 400 V / 50 Hz Legend: =A V : Shredder +S: in switch cabinet +MA: on machine +BF: Keypad ...

  • HSM HSM FA 500.2 - page 15

    0702 15 F A 500.2 Solo 400 V ...

  • HSM HSM FA 500.2 - page 16

    16 0702 F A 500.2 Solo 400 V ...

  • HSM HSM FA 500.2 - page 17

    0702 17 F A 500.2 Kombi 400 V Combination 400 V / 50 Hz ...

  • HSM HSM FA 500.2 - page 18

    18 0702 F A 500.2 Kombi 400 V ...

  • HSM HSM FA 500.2 - page 19

    0702 19 F A 500.2 Kombi 400 V ...

  • HSM HSM FA 500.2 - page 20

    20 0702 F A 500.2 Kombi 400 V ...

Fabbricante HSM Categoria Paper Shredder

I documenti che otteniamo dal fabbricante del dispositivoHSM HSM FA 500.2 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici HSM
- manuali per l’uso FA 500.2
- schede prodotto HSM
- opuscoli
- o etichette energetiche HSM HSM FA 500.2
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso HSM HSM FA 500.2.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione HSM HSM FA 500.2, manuali di manutenzione, brevi manuali o manuali utente HSM HSM FA 500.2. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto HSM HSM FA 500.2.

Manuali per l’uso simili

Manuale completo del dispositivo HSM HSM FA 500.2, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare HSM HSM FA 500.2 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti HSM HSM FA 500.2.

Il manuale per l’uso completo HSM, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale HSM HSM FA 500.2 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice HSM HSM FA 500.2, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per HSM HSM FA 500.2 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo HSM HSM FA 500.2 - che ci dovrebbe aiutare nei primi passi durante l'uso HSM HSM FA 500.2
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del HSM HSM FA 500.2
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio HSM HSM FA 500.2 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su HSM HSM FA 500.2?

Utilizza il modulo sottostante

Se non hai risolto il problema con HSM HSM FA 500.2 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con HSM HSM FA 500.2 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)