English dropdown-ico

Manual HSM HSM FA 500.2

20 pages 1.22 mb
Download

Go to site of 20

Summary
  • HSM HSM FA 500.2 - page 1

    HSM F A 500.2 OPERA TING INSTRUCTIONS P APER SHREDDER Combination with HSM KP 80 Keep this instruction for future use! 1.655.999.1 12 – 0702 english ...

  • HSM HSM FA 500.2 - page 2

    2 0702 F A 500.2 HSM GmbH + Co. KG Bahnhofstrasse 1 15 D-88682 Salem / Germany T el.: +49 (0) 75 53 / 822-0 Fax.: +49 (0) 75 53 / 822-160 E-Mail: info@hsm-online.de www .hsm-online.de Contents 1. Proper use, warranty ................................................................................................................. 3 2. Safety instruc ...

  • HSM HSM FA 500.2 - page 3

    0702 3 F A 500.2 Danger of injury Do not reach into the paper feed opening. Splinters can cause injury Wear protective goggles when de- stroying diskettes, CDs and hard credit cards. Danger of injury during intake Do not go near the paper feed open- ing with long hair , loose clothing, ties, scarves, necklaces, bracelets etc. Do not destroy any mat ...

  • HSM HSM FA 500.2 - page 4

    4 0702 F A 500.2 Combination with HSM KP 80 3. Overview 1 7 4 3 2 5 1 Main switch (only solo-version) 2 Keypad 3 Emergency stop button 4 Loading tray 5 Intake conveyor , paper feed opening 6 Braking swivel castors 7 Nameplate 8 Oiler 8 6 ...

  • HSM HSM FA 500.2 - page 5

    0702 5 F A 500.2 4. Dimensions Space requirements for operation and maintenance Load on rollers HSM F A 500.2 Combination-version HSM F A 500.2 Stand alone-version Combination-version Stand alone-version 2 x 180 kg 2 x 180 kg 1590 1925 max. 1410 1185 960 630 500 1155 880 500 880 1155 560 910 960 630 1000 500 1255 3500 1000 500 1255 2590 1410 1185 8 ...

  • HSM HSM FA 500.2 - page 6

    6 0702 F A 500.2 5. T ransportation, installation • During transport, observe the high centre of gravity of the paper shredder! • Place the pallet with the shredder in its packaging on a smooth, level surface. • Observe the instructions for unpacking. • If you need to move the shredder through narrow doors, you can wait until it is at its ? ...

  • HSM HSM FA 500.2 - page 7

    0702 7 F A 500.2 • Insert the connecting screw (5) and the clamp (6) on the end of the hose and secure the unit on the oiler . • Pour the oil into the oiler container from the two bot- tles supplied. Ready for operation Green LED Light has no function. Start button The shredder switches on. The feed belt moves in the intake direction. Stop butt ...

  • HSM HSM FA 500.2 - page 8

    8 0702 F A 500.2 7. Start-up and inspecting the safety devices Check that the safety devices are working properly: • At the start of each shift • After any maintenance or repair work Do not start the machine until you have checked the safety devices and found them to be in perfect working order . If any defect arises during operation stop the m ...

  • HSM HSM FA 500.2 - page 9

    0702 9 F A 500.2 Safety switch on the inspection door (only stand alone-version) Open the inspection door . The shredder must switch off immediately and the ” Safety circuit interrupted ” LED must light up. The machine will only start again once you have closed the inspection door . Safety switch on the protective fl ap (only stand alone-versi ...

  • HSM HSM FA 500.2 - page 10

    10 0702 F A 500.2 8. Malfunctions Check the following before calling customer service: • Is the power plug connected? • Is the shredder switched on? • Is there a paper jam in the shredder? • Has the motor been overloaded? Paper jam Y ou have fed in too much paper . ` The red LED on the keypad blinks. ` The cutting block automatically runs i ...

  • HSM HSM FA 500.2 - page 11

    0702 11 F A 500.2 Checking the chain tension (twice yearly) • Switch off the shredder . • Pull out the power plug. • Remove the left side cover . The sagging of the chain should be 9 to 14 mm. If you need to tighten the chain: • Loosen the clamping nuts (1). • Lower the motor until the sagging is 9 to 14 mm. • T ighten the clamping nuts ...

  • HSM HSM FA 500.2 - page 12

    12 0702 F A 500.2 Tightening the feed belt The feed belt should not slip when loaded with material. • Switch off the shredder . • Remove the feeding table and the left and right side covers. • Loosen the hexagon nuts (1) of the tension roll on the left and right side. • Loosen the lock nuts (2) of the tensioning bolts (3). • T ighten the ...

  • HSM HSM FA 500.2 - page 13

    0702 13 F A 500.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 1 15, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM F A 500.2 corresponds with the above mentioned EC Machine Directive includi ...

  • HSM HSM FA 500.2 - page 14

    14 0702 F A 500.2 Solo 400 V 12. Electric wiring diagrams Solo 400 V / 50 Hz Legend: =A V : Shredder +S: in switch cabinet +MA: on machine +BF: Keypad ...

  • HSM HSM FA 500.2 - page 15

    0702 15 F A 500.2 Solo 400 V ...

  • HSM HSM FA 500.2 - page 16

    16 0702 F A 500.2 Solo 400 V ...

  • HSM HSM FA 500.2 - page 17

    0702 17 F A 500.2 Kombi 400 V Combination 400 V / 50 Hz ...

  • HSM HSM FA 500.2 - page 18

    18 0702 F A 500.2 Kombi 400 V ...

  • HSM HSM FA 500.2 - page 19

    0702 19 F A 500.2 Kombi 400 V ...

  • HSM HSM FA 500.2 - page 20

    20 0702 F A 500.2 Kombi 400 V ...

Manufacturer HSM Category Paper Shredder

Documents that we receive from a manufacturer of a HSM HSM FA 500.2 can be divided into several groups. They are, among others:
- HSM technical drawings
- FA 500.2 manuals
- HSM product data sheets
- information booklets
- or energy labels HSM HSM FA 500.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual HSM HSM FA 500.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HSM HSM FA 500.2, service manual, brief instructions and user manuals HSM HSM FA 500.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HSM HSM FA 500.2.

Similar manuals

A complete manual for the device HSM HSM FA 500.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HSM HSM FA 500.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HSM HSM FA 500.2.

A complete HSM manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HSM HSM FA 500.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HSM HSM FA 500.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HSM HSM FA 500.2, that we can find in the current document
3. Tips how to use the basic functions of the device HSM HSM FA 500.2 - which should help us in our first steps of using HSM HSM FA 500.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HSM HSM FA 500.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HSM HSM FA 500.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HSM HSM FA 500.2?

Use the form below

If you did not solve your problem by using a manual HSM HSM FA 500.2, ask a question using the form below. If a user had a similar problem with HSM HSM FA 500.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)