English dropdown-ico

Manual Toro 730

8 pages 0.13 mb
Download

Go to site of 8

Summary
  • Toro 730 - page 1

    Introduction __________________________________ The 730 Series Full Circle Rotary Sprinklers are designed for irrigation of large turf areas such as golf courses, parks, recreational fields and school grounds. Manufactured from durable, high strength engineering plastic and stainless steel components, these sprinklers incorporate many innovative an ...

  • Toro 730 - page 2

    Installation Procedure _____________________ CAUTION Golf sprinklers are intended for installation at grade with full support of the body and piping system from the surrounding earth. Failure to provide full support may result in premature failure of the body and/or connecting fittings. To assure maximum performance from your 734 Series Rotary Spri ...

  • Toro 730 - page 3

    Connecting Hydraulic Control T ubing 1. Route control tubing from controller to sprinkler location(s). NOTE: ❚ Leave an 18" (45.7 cm) service loop of tubing at each sprinkler to facilitate movement of sprinkler and service operations. ❚ Tubing runs in excess of 1,000' (304.8 m) are not advisable due to delayed response time. ❚ The v ...

  • Toro 730 - page 4

    Pilot V alve Operation (Model 734-X6-XXX Only) The main function of the pilot valve is to control the operation of the main valve located in the base of the sprinkler body. The main valve is operated by the release of water metered through the pilot valve when it is activated either manually at the sprinkler or by the irrigation system controller. ...

  • Toro 730 - page 5

    System T roubleshooting — Sprinklers (continued) PROBLEM POSSIBLE CAUSE – CORRECTIVE ACTION 5. Valve won't open (a) Plugged controller discharge line or discharge port in pilot valve. (Hyd. Normally Open – Verify by checking for discharge at discharge line when station is activated. If no discharge, 734-X1-XX) refer to Controller Service ...

  • Toro 730 - page 6

    Servicing Procedures Introduction The 734 sprinkler is designed to provide the user trouble-free operation for many years without scheduled maintenance. Should it become necessary to disassemble the sprinkler to correct a malfunction or replace a component, all internal parts of the sprinkler are accessible from the top. Refer to the Troubleshootin ...

  • Toro 730 - page 7

    V alve Removal and Replacement 1. To remove valve assembly, squeeze ears of snap ring together with snap ring pliers (P/N 995-07) and remove snap ring from sprinkler body. (See Figure 3 .) CAUTION If snap ring is difficult to remove, there may be residual water pressure in the system. Recheck the water supply to ensure it is turned off and all pres ...

  • Toro 730 - page 8

    Flushing Sprinkler Heads 1. With sprinkler operating, carefully step down on center of cap several times. Water will flow around riser and flush out debris. 2. Cycle sprinkler on and off several times to check for proper retraction. Cap should be even with top of body flange when full y retracted. If riser sticks in up position, check for debris lo ...

Manufacturer Toro Category Sprinkler

Documents that we receive from a manufacturer of a Toro 730 can be divided into several groups. They are, among others:
- Toro technical drawings
- 730 manuals
- Toro product data sheets
- information booklets
- or energy labels Toro 730
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toro 730.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toro 730, service manual, brief instructions and user manuals Toro 730. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toro 730.

Similar manuals

A complete manual for the device Toro 730, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toro 730 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toro 730.

A complete Toro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toro 730 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toro 730, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toro 730, that we can find in the current document
3. Tips how to use the basic functions of the device Toro 730 - which should help us in our first steps of using Toro 730
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toro 730
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toro 730 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toro 730?

Use the form below

If you did not solve your problem by using a manual Toro 730, ask a question using the form below. If a user had a similar problem with Toro 730 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)