Manual Graco 223185 Series C

18 pages 0.49 mb
Download

Go to site of 18

Summary
  • Graco 223185 Series C - page 1

    Instructions – Parts List GRACO INC. P .O. BOX 1441 MINNEAPOLIS, MN 55440–1441 Copyright 1989, Graco Inc. is registered to I.S. EN ISO 9001 2:1 Ratio Monark R Pump 200 psi (1.4 MPa, 14 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure Part No. 223185, Series C 55 Gallon (200 Liter) Drum Size, UHMWPE and Lea ...

  • Graco 223185 Series C - page 2

    2 307985 Symbols W arning Symbol W ARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. W ARNING EQUIPMENT MISUSE HAZARD Equipment misuse can c ...

  • Graco 223185 Series C - page 3

    307985 3 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static sparking or you feel an electric shock while using ...

  • Graco 223185 Series C - page 4

    4 307985 Notes ...

  • Graco 223185 Series C - page 5

    307985 5 Installation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces- sories, available from your Graco distributor . If you supply your own accessories, be sure they are ade- quately sized and pressure rate ...

  • Graco 223185 Series C - page 6

    6 307985 Installation 06089 Fig. 2 KEY A Bleed-T ype Master Air V alve (required, for pump) B Air Filter/Regulator C Air Line Lubricator D Fluid Drain V alve (required) E Surge T a nk F Fluid Shutoff V alves G Fluid Filter H Fluid Pressure Regulator J Air Spray Gun K Back Pressure Regulator L Pump M Air Supply Line N Bleed-T ype Master Air V alves ...

  • Graco 223185 Series C - page 7

    307985 7 Installation A vailable Accessories (must be purchased separately) Air Line Accessories W ARNING A bleed-type master air valve (A) is required in your system to help reduce the risk of serious injury , including splashing of fluid in the eyes or on the skin, and injury from moving parts if you are adjust- ing or repairing the pump. The ble ...

  • Graco 223185 Series C - page 8

    8 307985 Operation Pressure Relief Procedure W ARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying acci- dentally . T o reduce the risk of an injury from acci- dental spray from the gun, splashing fluid, or moving parts, follow the Pressure Relief Proce- dure whenever you ...

  • Graco 223185 Series C - page 9

    307985 9 Operation Prime the Pump 1. See Fig. 2. Remove the spray nozzle from the gun. See the gun instruction manual. 2. Close all bleed-type air valves (A, N). 3. Close the pump air filter/regulator (B). 4. Close the fluid drain valve (D). 5. Check that all fittings throughout the system are tightened securely . 6. Connect the air supply line to ...

  • Graco 223185 Series C - page 10

    10 307985 Notes ...

  • Graco 223185 Series C - page 11

    307985 1 1 Maintenance Shutdown and Care of the Pump W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. For overnight shutdown, stop the pump at the bottom of its stroke to prevent fluid from drying on the ex- posed displacement rod and damaging the ...

  • Graco 223185 Series C - page 12

    12 307985 T roubleshooting W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. 1. Relieve the pressure. 2. Check all possible problems and solutions before disassembling pump. Problem Cause Solution Pump fails to operate. Restricted line or inadequate ...

  • Graco 223185 Series C - page 13

    307985 13 Service Disconnecting the Displacement Pump NOTE: For displacement pump repair instructions, refer to the separate displacement pump manual 307983, supplied. W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. 1. Flush the pump if possible. ...

  • Graco 223185 Series C - page 14

    14 307985 Parts Model 223185, Series C 2:1 Ratio Monark Pump, 55 Gallon (200 Liter) Drum Size; UHMWPE and Leather Packed Ref Part No. No. Description Qty 1 206955 AIR MOTOR, Monark See 307043 for parts 1 3 223177 PUMP , displacement; used on Model 223185 See 307983 for parts 1 4 19161 1 ROD, connecting; 19.54 in. (496.3 mm) long 1 6 100579 PIN, cot ...

  • Graco 223185 Series C - page 15

    307985 15 Parts Model 223186, Series C 2:1 Ratio Monark Pump, Stubby Size; UHMWPE and Leather Packed Ref Part No. No. Description Qty 1 206955 AIR MOTOR, Monark See 307043 for parts 1 3 223177 PUMP , displacement; used on Model 223186 See 307983 for parts 1 4 191736 ROD, connecting; 6.98 in. (177.3 mm) long 1 6 100579 PIN, cotter 1 7 162648 LOCKWAS ...

  • Graco 223185 Series C - page 16

    16 307985 Dimensions 06085 A B C Model No. A B C 223185 47.81 in. (1215 mm) 15.31 in. (389 mm) 32.5 in. (826 mm) 223186 35.31 in. (897 mm) 15.31 in. (389 mm) 20 in. (508 mm) Mounting Hole Layout 2.254 in. (57.25 mm) 5.250 in. (133.4 mm) 0.375 in. (9.52 mm) diameter 2.625 in. (66.67 mm) 3.188 in. (80.97 mm) NOTE: Use mounting gasket 161322. 1 in. np ...

  • Graco 223185 Series C - page 17

    307985 17 T echnical Data Category Data Ratio 2:1 Maximum fluid working pressure 200 psi (14 bar) Maximum air input pressure 100 psi (7 bar) Pump cycles per 1 gallon (3.8 liters) 11 Fluid flow at 60 cycles per minute 5.5 gpm (21 liters/min) Fluid inlet size 1–1/2 npt(f) Fluid outlet size 1 in. npt(f) Air inlet size 3/8 npsm(f) Weight 40 lb (18.14 ...

  • Graco 223185 Series C - page 18

    18 307985 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from the ...

Manufacturer Graco Category Marine Sanitation System

Documents that we receive from a manufacturer of a Graco 223185 Series C can be divided into several groups. They are, among others:
- Graco technical drawings
- 223185 Series C manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 223185 Series C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 223185 Series C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 223185 Series C, service manual, brief instructions and user manuals Graco 223185 Series C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 223185 Series C.

Similar manuals

A complete manual for the device Graco 223185 Series C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 223185 Series C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 223185 Series C.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 223185 Series C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 223185 Series C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 223185 Series C, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 223185 Series C - which should help us in our first steps of using Graco 223185 Series C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 223185 Series C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 223185 Series C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 223185 Series C?

Use the form below

If you did not solve your problem by using a manual Graco 223185 Series C, ask a question using the form below. If a user had a similar problem with Graco 223185 Series C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)